Lifting Appliances and Lifting Gears Inspection Service 升降或作懸吊之用的起重機械及起重裝置檢測服務
Lifting Appliances and Lifting Gears Inspection Service 升降或作懸吊之用的起重機械及起重裝置檢測服務
Introduction 服務簡介
Whether you are the owner or operator of the Lifting Appliances and Lifting Gears (hereinafter referred to as Lifting Devices), you need to ensure they are safe, and in compliance to with statutory requirements. SGS cares about service about occupational safety and health and provides professional inspection services to support and assist you and your working environment safety issue.
無論您是擁有還是操作升降或作懸吊之用的起重機械及起重裝置(以下簡稱:吊重裝置),使用前都需要確保它們是安全的,符合法例規定。 SGS關注職業安全健康,以專業的檢測服務爲你營造安全的工作環境提供保障。
why sgs? 為何選擇SGS?
When will you need SGS inspection service for the Lifting Devices?
- New installation of Lifting Devices or after repairing work and maintenance, it needs carrying out as carefully thorough examination;
- Before the certification expiry date or annual inspection date
- Evaluation and inspection of the Special designed Lifting Devices;
What kind of Lifting Devices should be applied for SGS inspection?
Famous: a chain sling, rope sling, ring or similar gear, and a link, hook, plate clamp, shackle, eyebolt, crane, horizontal fall arrest system, gondola, working platform and scaffolding systems;
Lifting Appliance: a crab, winch, teagle, pulley block or gin wheel used for raising or lowering, and a crane, sheerlegs, excavator, pile driver, pile extractor, dragline, aerial ropeway, aerial cableway transporter or overhead runway, and also any part of any such appliance;
Lifting Gear: a chain sling, rope sling, ring or similar gear, and a link, hook, plate clamp, shackle, swivel or eyebolt;
Crane: some appliance equipped with mechanical means of raising and lowering a load and for transporting the load while suspended; and also all chains, ropes, swivels, or other tackle (down to and including the hook), used in the operation of a crane;
Raising or lowering or as a means of suspension: raising or lowering or as a means of suspension of a load on a lifting appliance or lifting gear;
何時需要SGS 為吊重裝置提供檢測服務?
- 新安裝或維修吊重裝置後,需為設備進行徹底檢測;
- 該設備定期/常規檢查到期前;
- 特殊吊重裝置的評估及檢測;
SGS對以下各類型吊重裝置進行專業的強制或自願檢驗:
常見裝置及設施:吊索、纜吊索、環圈、有眼螺栓、鏈環、吊鈎、滑輪組、起重機、水平防墮繫穩裝置系統、吊船、升降台、脚手架;
起重裝置: 吊索、纜吊索、環圈或同類裝置,以及有眼螺栓、鏈環、吊鈎、板鉗、鈎環、轉環或板鉗;
起重機:備有機械設備用以升起及降下負荷物及用以運輸懸吊中的負荷物的機械,以及指在起重機操作中使用的所有鏈條、纜索、轉環或其他滑車;
起重機械:用以升降的起重滑車、絞車、捲揚機、滑輪組或吊重輪,以及起重機、腳架起重機、挖掘機、打樁機、拔樁機、拉索挖機、架空纜車、架空纜道運送機或架空軌道,以及此等機械的任何部分
其他:水平防墮繫穩裝置系統、吊船、升降台、金屬棚架等;
Target Audience 目標客戶
SGS is providing professional inspection and certification services to the Lifting appliances and lifting gears, to ensure they are safe, and in compliance to with statutory requirements, to reduce the risk. It’s preventive safety protection in your working environment.
SGS對升降或作懸吊之用的起重機械及起重裝置(以上簡稱:吊重裝置)具備充足的檢測能力,為確保裝置及設施在使用前符合相關指引,將安全隱患降至最低,為你的營業場所提供多一份安全保障。
管有及使用吊重裝置的常見區域及範圍:
Estate 屋苑
School 學校
Mall 商場
Workplace 工場
Construction Site 地盤
service Scope 檢驗服務範圍
- Visual inspection;
- Dynamic and static load testing
- Operational tests to assure that your unit is functioning properly
- Re-examination of all safety devices
- Certification service, endorsed by Register Professional Engineer;
(Include but not limited to the above description) - 目視檢測
- 動態和靜態負載測試
- 進行運行測試,確保您的裝置功能正常
- 複檢所有安全裝置
- 證書服務
(包括但不僅限於以上描述内容)
Service flow 服務流程
1. Request A Quote
索取報價
Complete the form to get an initial quote online
填寫以下表格網上索取初步報價
2. Confirm Quote
確認報價
Confirm requirement, scope and schedule to finalize the quote
確認服務細節及時間落實報價
3. Arrange Paym
付款
Arrange bank transfer payment and send record to us
安排轉帳並將紀錄傳送給我們
4. Onsite Service 現場服務
Conduct service based on committed schedule
於已確認的服務日期及時段進行消毒或檢測服務
5. Receive Report
獲取報告
Receive our audit report and certificate
獲取SGS發出的報告及證書
FAQs
The RCS and GRS are the same, except that the GRS being a more rigorous standard; in the GRS, there is a higher minimum content percentage (50%) and additional processing requirements that must be met (social, environmental, and chemical).
need a quote? 需要報價?
"*" indicates required fields